Technical Lead : Riley
This will be an ongoing task pretty much up until the rocket is integrated.
Requirements of the rocket design:
Active reset line for resetting electronics. This should be a line run over EQD that connects the witcher active diodes to both the Raspberry PI (for remote reset) and also a manual reset button on a ~50m line (in case PI dies and you have to depressurise).
Using kicad, etc… Chose to use this component rather than this one because so and so.
Link any resources here, i.e. other diagrams, schematics, online articles / designs.
Section for miscallaneous notes related to the project, or ideas for the next version.